Arduino Pills – Change USB HID names

When multiple control boxes are connected they all come with the same name. In theory that’s not a big issue but I have noticed that DCS sometimes messes up. There must be a way to fix this situation, isn’t it?

A-firm, the solutions is quite simple: we just need to change a couple lines in the boards.txt file, then recompile and write the code.

My Kingdom for a Board!

boards.txt is a sneaky file though because it’s located in multiple folders. The one we are aiming for (and it should work for you as well) is located in AppData.

As of now, the path is:
C:\Users\USERNAME\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21
If the path doesn’t exist start from AppData and walk your wait down to boards.txt.

arduino-pills-vid_pid
boards.txt Path

Open boards.txt and locate this three fields:

leonardo.build.vid
leonardo.build.pid
leonardo.build.usb_product

These are the values we want to change. These, for instance, are mine:

arduino-pills-1-boardstxt
vid, pid and product from boards.txt

If you are using a Genuino Micro instead of Arduino Leonardo (it’s still based on the ATmega32u4), the values you need to change are different. These are from my Radio box, for instance:

micro.build.vid=0x1212
micro.build.pid=0x3434
micro.build.usb_product="K Radio Panel"

If you are wondering where I got my VID and PID values well, I’ve blatantly invented them. IIRC for commercial applications you should buy them; I guess they work as the MAC address. It’s not a problem for us since we are working on simple, personal, project.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s